OUR XL VERSION WITH MORE EXTRAS INCLUDED.<\/u><\/b><\/p>\n
What\u2019s included?<\/u><\/b><\/p>\n
Here\u2019s what you get.<\/p>\n
\u2022 1m x 150mm top quality carbon fibre cloth. 1k 90gsm (this means it is thin, lightweight, not bulky and obtrusive, yet strong and has a nice tightly woven pattern).<\/p>\n
\u2022 150g Resin and 38g Hardner. MIX RATIO 4-1.<\/p>\n
Throughout testing many different resins this was the best available for this type of carbon fibre application. Gives a strong hard wearing glossy finish. (a cheap resin will not be up to the job).<\/p>\n
\u2022 FIFTEEN metre<\/b><\/span> roll of Surface finishing tape.\u00a0Standard Kit is 10m<\/span><\/p>\n This is the exact tape we use in day to day repairs ourselves. It is not a \u2018shrink tape\u2019 as supplied with other kits. A surface finishing tape leaves a glossy, \u2018lacquered\u2019 look to the finished repair, reducing the need for extensive sanding and lacquering. When wound over the repair as directed, under slight tension, there is no need for a shrink tape as the tension applied will create the \u2018shrink\u2019 needed. Also, after researching the many \u2018shrink tapes\u2019 available, we found that a certain (normally very high) temperature is needed to activate the shrinkage and that temperature needs to be held constant for a certain time period. We felt this couldn\u2019t be achieved at home with a hairdryer or heat gun.<\/p>\n \u2022 TWO Mixing cups and 2 mixing sticks<\/span>For mixing the resin and hardener. Standard kit is 1 of each.<\/span><\/p>\n \u2022 TWO PAIRS Latex gloves<\/span> high quality, not cheap vinyl that tear easily. Standard kit is 1 pair.<\/span><\/p>\n \u2022 TWO brushes<\/span> for application of resin mixture. So if you need extras, this is the kit for you! Our standard kit is\u00a0separately listed. Also check our other listings for\u00a0separate components.\u00a0<\/span><\/span><\/p>\n","protected":false},"excerpt":{"rendered":" OUR XL VERSION WITH MORE EXTRAS INCLUDED. What\u2019s included? Here\u2019s what you get. \u2022 1m x 150mm top quality carbon fibre cloth. 1k 90gsm (this means it is thin, lightweight, not bulky and obtrusive, yet strong and has a nice tightly woven pattern). \u2022 150g Resin and 38g Hardner. MIX RATIO 4-1. Throughout testing many … Continue reading XL DIY Pole Repair Kit<\/span>
\nStandard kit is 1 Brush.<\/span><\/p>\n